Dillon GTX Plus Force Gauge Manual de usuario descargar pdf (Pagina 5)

GTX-Plus Series User’s Manual REV 2.1

Using the GTX

Fitting Accessories

Couple fittings directly to the load cell stem or use an extension

rod. The threads are 10-32 in capacities up to 1000 N, and 5/16-18 in

the 2500 N capacity.

Ensure that fixturing does not contact the force gauge case.

Ensure that anything coupled to the gauge is screwed finger-tight

only. Excessive torque can damage the load cell and is not covered by

warranty.

Mounting to Test Stand

The two 10-32 threaded holes on the rear of the gauge can be

used for mounting the gauge. The distance between the holes is 2.25

inch. A versatile stand mounting plate is available to couple the force

gauge to many brands of test stands.

Powering up

As show in Figure 1 the control panel has eight keys.

Figure 1 GTX control panel

To power up the gauge press the ON/OFF key. A short self-test

runs during which the display will show the capacity in Newtons.

1 2 3 4 5 6 7 8 9 10 ... 25 26

Sin comentarios

Dillon GTX Plus Force Gauge Manual de usuario Pagina 5